RandomName2090

Hello ,

I have been trying to separate my nvr from my network by placing on a separate subnet. Here are the issues I run into and here Is my equipment.

Modem Bell HH3000 Router 1 Archer 10 Router 2 archer 10 NVR reolink 8 channel 4k

I initially had my home network on the router connected to port 1 on HH3000 and the nvr on port 2 of HH3000. The HH3000 designated ips on the same subnet for both. And they could see each other even though the archer had made a different subnet for its own ips . So Router assigned 192.168 2.30 nvr 2.31 .. all my devices connected to Router is 192.168.0.xx which is technically on a different subnet then the NVR but I am still able to ping it.
The

I have had this kit for less than a week and all four cameras fog up inside due to poor seal. I had bought one separately on Amazon and have had no issues.

I contacted warranty support and over 4 days they have given me the run around. I just want them to replace the faulty cameras and check their quality assurance.

If I don't get my replacements I will charge back with my credit card.