SteelCogs
u/SteelCogs
Sorry to bring up the seemingly age old question of the F2.8 vs F4. I'm relatively new to photography with an R10 and am looking at either of those two lenses. I have a primary interest of hobby motorsports photography and maybe some basic astrophotography as a secondary interest.
I rented the 2.8 lens for a 1 day race I went to but made the mistake of taking primarily panning/slower shutter shots so I didn't get to make much use out of the wide open aperture and take it for a real test drive.
I've just been having a hard time pulling the trigger on purchasing a used 2.8 since I've seen so many positive things said about the F4 and it being like $1000+ less. I'm not currently planning on
I recently rented an RF 70-200mm 2.8 to take to a motorsports event. As soon as I got there I realized I screwed up for any non-panning shots by not getting an ND filter so I could set the aperture to 2.8 without completely overexposing. I later realized may have been able to up my shutter speed a ton to work around that, but I digress.
I got one of those variable KF ND filters to at least try out to see if it would solve the exposure at lower shutter speeds. It did, but I noticed that at farther focal lengths like 200mm, the subject would not be in focus. No luck with AF or MF. As soon as I take the ND filter off, no issue. Is this just a cheap filter issue? If so, what can I try instead
I'm interested in getting an R10 from Canon's refurbished section on their website. The EOS R10 RF-S18-45mm F4.5-6.3 is currently $800. I saw 1 or 2 other posts from a few months back where it went down even lower to $600. Is the pricing case by case with each camera they refurbish or does Canon just do different sales every so often? Just trying to figure out if it's worth waiting and watching the price for a bit before pulling the trigger.
Been looking seriously for the past month or so, and I have a strong preference for a Blue Flame Circuit Edition. Just using the inventory search within 500mi of me (Nor Cal) 8/65 are blue, and the rest are white. Is this the typical distribution?
I'm just curious if I should just continue to be patient and keep searching or if it will be nearly impossible to find a blue one both at/near MSRP and not incredibly far away. White seems like it would be pretty easy to get ahold of nearby and at MSRP. While I do like it in white, I just prefer blue. Thoughts?
Firstly, is this a real thing? I keep seeing snippets about it but no concrete info. Getting info from COTA about the Thursday schedule has proven to be difficult as well.
It's listed as an actual event for 3-day ticket holders on this website with a time on Thursday, but I can't find any more info about it anywhere else, other than reddit posts which still seem somewhat vague.
If this is indeed happening, how does this work logistically? I have a 3 day pass and a 3 day shuttle pass for the weekend, so how would parking work and which entrance would I take to get in? I attended a similar Thursday event for MotoGP this year and had to have the p
I have CSL Elite v2 set that I've been using for 10 months or so, originally coming from G29 pedals. I have a friend who also upgraded around the same time to Clubsport V3 pedals. We're both curious what the biggest differences between our pedal sets (which seem to be the lower end of loadcell pedals) and higher end ones, such as Heuskinvelds, VRS, Asetek, VNM, etc.
Obviously each of these different sets have their own feeling to them, but is there an explainable, overarching difference between the lower and higher end loadcell pedals? We both are considering upgrading but have held off since we have no experience using pedals nicer than the ones we have.
I'm wanting to write a macro for a Haas lathe with a bar feeder where I can use the tool breakage detection to check for broken/worn inserts every X amount of parts on larger production runs so the machine can stay unattended longer. Is this possible? I would think it could just be a simple IF/THEN statement but what I couldn't figure out is how I would tell it to run the tool check after every, let's say, 10 parts. For If's I could only find EQ, NE, GT, LT, and GE, none of which seem like they'd be a proper fit for what I'd like to do.
A little additional info is I use F360 to program and a bar feeder with a G105 a the end of the program. I use the G105/bar feeder setup to loop the program
So the relevant info I have is that I have an iPhone 13 Pro, the 5G Start plan, and am in the Stockton, CA area.
Anyway what I've noticed is that as long as my phone says I have 5G in the upper right, it works flawlessly. As soon as it says LTE instead, I might as well have 0 service at all, not matter how strong the signal is. It's like an on/off switch difference. I can be in the exact same spot and load a full HD video fine, but then not even be able to play a song on Spotify minutes later. On vacation in a large city I consistently had no 5G logo (again, basically meaning 0 service), whereas friends with me on different carriers had no issues whatsoever.
The only logical thing I can th
Is it possible to do? I mainly just want to have my pedal positions on screen while also being able to see data such as lap delta, etc.
Also is it possible to reposition the telemetry elements? Very possible I'm missing a very obvious setting lol.




