TurtlePower54

u/TurtlePower54



r/Plumbing•

My pump pressure switch properly tells the well pump to turn on at about 40psi. The pump turns on but then about a minute or two later turns off. Then it'll cycle and repeat this process until the pressure switch tells it to turn off at 60psi.

I have a new-ish pressure switch and new-ish tank. My control box is hooked up to a safety switch which is hooked to the pressure switch. Here is the pic of that.

I decided to open up the control box and this is what I found. The capacitor is not hooked to anything. When I looked at the little hole in it, it was kinda white but a little brown.

Here is how the control

38

You've reached the end of this feed.