bachya

u/bachya


r/selfhosted•

Hi all,

Sharing a self-hosted project I’ve been building for awhile: ecowitt2mqtt

TL;DR: this is a small web server that receives data from Ecowitt weather stations & gateways and sends it to an MQTT broker. This allows for local, near-real-time weather data to be sent to any number of applications via MQTT (including full support for Home Assistant MQTT Discovery). Ecowitt gateways can even be used to receive data from white-labeled weather stations, like those from Ambient Weather.

It has a lot of great features (including several calculated data points that the weather stations don’t provide natively, like how long various skin types can

139


r/homelab•

I currently have a USG 3P as my gateway and have virtualized instances of AdguardHome/Unbound on two Proxmox nodes for redundancy. Like many, I’m tiring of how crippled the USG feels and am planning a move to OPNsense (likely on its own appliance so I can reboot my rack without taking the internet down).

I understand that OPNsense (a) uses Unbound as its standard DNS resolver and (b) has support for AdguardHome via a community plugin. My question: should I retain my two separate LXCs that currently run these apps or should I scrap those and use the “built-in” versions within OPNsense? It it a matter of philosophical taste or are there issu

21

r/selfhosted•

Hi all,

I recently ran into an interesting DNS issue with Unbound and NAT redirection. I've solved it, but I have no clue why the solution works. Posting here in the hopes that somebody can educate me!

Like many, I have NAT redirection rules in place to ensure that all of my VLANs are forced to use a particular IP address for DNS – ostensibly, "If a host attempts to reach port 53 on an IP other than the one I want, redirect that request to the desired IP." Until recently, that IP address had been that of my gateway (a USG 3P); however, I finally took the plunge and implemented an AdguardHome/Unbound stack and updated the NAT rules to point there, instead.

With that preamble, here's the si

20

r/KeybaseProofs•

Keybase proof

I am:

Proof:

hKRib2R5hqhkZXRhY2hlZMOpaGFzaF90eXBlCqNrZXnEIwEgKpWblpW56rL4qllNjZI7cfKlnC0zU5OPFBYrpG97pbUKp3BheWxvYWTESpcCBsQg6lhvqPl9Kcpd9/aZTSUDirnTCWQbyfArxc58f74dkRzEIL0Vp8JjjK5r2KDDv9FJN7uvBLFt/07XHaTOkqeEwdtkAgHCo3NpZ8RA9SK1MTK5JxHJgJ1l2/wa/9KUS9JmIBYMPa+4IKCZXhqAYnjhzB/RHcl1Jj00eA5+CYFKhw2jK+sMsDZ6IXQCDKhzaWdfdHlwZSCkaGFzaIKkdHlwZQildmFsdWXEII2ygZdv1qHmCc57UgktBP/5K5YnXkJWkgj/TxYqn8UZo3RhZ80CAqd2ZXJzaW9uAQ==
10

r/Proxmox•

Hello,

I am having issues attaching USB Z-Wave dongles to Cloud-Init-enabled Debian 10 VMs created in PVE 6.3-2. I've read a variety of posts here, but nothing so far has solved my issue; hoping someone can help me debug further.

In short, my PVE host correctly detects and loads each dongle without issue. When I pass through the USB device into a VM, I am able to see the low-level device (via lsusb), but no /dev entry is created (perhaps indicating that the kernel isn't loading drivers correctly?).

I've plugged both dongles into my host and can see them low-level:

root@pmc-node-1:~# lsusb | grep Cygnal
Bus 001 Device 007: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP2102/CP2109 UA
17

r/ansible•

Curious to get opinions on a best practice for deploying Docker-based stacks via Ansible.

Currently, I have a Git repo for each host that contains a docker-compose.yml, which defines the containers I want running on that host. Pre-Ansible, I would log into each host, pull the latest, and run docker-compose up -d. Now that I’m managing my hosts via a series of playbooks, I’m pondering the best way to deploy these stacks. I see two ideas:

  1. Keep the stack configuration in its own repo. In the playbook, focus on pulling the latest repo and spinning it up (using ansible.builtin.git and [community.genera
157

r/jellyfin•

I'm on 10.7.0-rc2 with the most recent Roku app and am noticing that one of my shows (Seinfeld) always seems to auto-play the same next episode (1.4: Male Unbonding). No matter what episode I select manually, this episode always comes next. I've also played this episode through to its ending, but even then, it starts to replay the same episode.

I've seen this same behavior with The Office: no matter what, the next episode to play is 1.2: Diversity Day.

I've confirmed that this behavior doesn't happen in the web client: there, auto-play works as expected (the next episode starts after the current one ends).

Anyone else run into this?

02