beager

u/beager


r/stopdrinking•

One year ago I decided to take a break from drinking. It’s been one of the better decisions of my life, and my thinking around it has changed from “I’m taking a break from drinking” to “I don’t think I need to drink.” After a few months I saw one year as a destination, but the more I stay on this journey with you all, the more I see the reality: there’s no destination, just the work to be done today, and a resolve to do that work today, as every new day becomes today.

Over the past year, alcohol has changed from something all around me that I was actively trying to resist, into a subculture that I am not a member of, one that I nonetheless need to learn to coexist with.

In that time, I aba

299

r/poker•

End of my night at the home game, down to half of my buy-in and on a bit of a tilt, so was going to flip if I had any reasonable hand. Game is super loose and fun, and .50 blinds but plays more like 1/2 so interpret my bet sizing accordingly. The action:

On the button, dealt 55. I open to 9bb hoping to weed out limpers but get 9 callers. Flop comes 5TK rainbow. Checks around and I shove for about 100bb. No fewer than five separate people tank and want to play it, but ultimately everyone lays it down and I essentially double up to end my night right where I started.

My question would be, is the pot size bet with low set and 9+ handed the right move here? Or should I have tried to pull the t

29

r/poker•

I was at a home game yesterday and when the flop came out I yelled “deez nuts!” to be funny, cause let’s face it, that’s pretty funny. Did it a couple more times but then I noticed that other players were getting annoyed and then noticed them getting tilted and spewing chips trying to call me down to shut me up, but my suited gappers kept winning. Even cracked kings with 36o that ran out AK524. So I kept doing it and tripled up my stack.

So what do you think, is being annoying +EV? Thinking of just doing it every time, building a bankroll, and taking deez nuts to the 1/3 casino circuit.

010

r/poker•

Hero btn, EP jams for 80bb, action folds to me. I go big tank with AKo and SB/BB still behind…

“AK is a drawing hand”… ”bet he’s got kings”… “blinds will probably rejam and someone will suck out”… “if I don’t play it I can’t shitpost about it later”… “fuck it, we ball”

I call, BB rejams for 40bb on top, I hate my life, I call.

EP had something like KJs, BB had ATs. Board came out five bricks in a row for everyone.

Remember kids, AK is a drawing hand. Sometimes you don’t make your draws. Play accordingly.

Bonus: huge meme potential later with 6h9h, player ahead 4bet to 16bb and I didn’t want to donk that off to miss, or worse, get attached to a low pair. Folded, and of course out comes 7

00


r/Zwift•

I don’t think I’ve loved any sort of fitness/sporting endeavor as much as this. 35 days in a row on a scrub-tier spin bike trying to keep pace with avatars in a virtual world.

I’m big (196cm/130kg) and over the time I’ve gone from hovering around 200 watts to consistently pushing 315 watts. Finally did the Epic KOM + radio tower today and really starting to notice the improvement.

Great to see everyone’s achievements here, from endurance to FTP gains to weight loss, all of which I’m excited for. Ride on!

12118

r/Homebrewing•

Hey folks,

I brewed an extract kit Hefeweizen that my wife absolutely loved and I want to elevate the next batch with my own recipe. My research led me through all sorts of advanced wizardry like decoctions, step mashing, and the like.

I’m pretty new and have limited time for brew days so I’d rather do a simple process, but I want to be sure I’m getting at least a “pretty good” hefe with my batch. Is there anything to the style that is a “must have” on process or ingredients?

This is the recipe I’m planning (5 gal batch assuming 66% efficiency with BIAB):

5lb pilsner malt and 5lb wheat malt, mash @152F for 60m .75oz Hallertau @60m 1pkg of WLP300

Ferment @68F for 14 days then bottle and

14

r/Homebrewing•

Brewed a 5gal BIAB DIPA, OG 1.071 (lower than expected due to BIAB and LHBS crush I suspect), and set up a blow off tube anticipating krausen overpowering the 6gal bucket. Had a lot of bubbling but never got any matter in the tube.

Not complaining at all, but I’m curious when folks here typically see a blow off assembly pay off. Is it a function of OG, style, yeast, conditions? Are you reliably seeing blow off with certain techniques?

Grateful for the advice from this sub that apparently helped me overprepare for my first DIPA. Cheers!

820

r/Homebrewing•

I checked out a different LHBS that is a farther drive from me but has a pretty big selection and does supply local breweries. When I was there I decided to enter their competition that will be judged on May 1.

Rules are actually pretty accommodating to a noob like me: grain bill is fixed, you choose a single hop, pick your yeast, then get crackin’. I love Citra and have yet to brew with it so I choose Citra, they pack me up and I’m on my way.

Fast forward to brew day. I’m bittering with a 1oz packet of the Citra. Damn it smells so good. I’m pumped to put this in three more times. Next addition is at flameout so I HAHB in the meantime while I wait.

Flameout comes and I tear open the 4oz p

29

r/Homebrewing•

Hello, I just completed moving 250lb of RO water from the grocery store into my garage in 6 5-gal water jugs. I am planning to create an “inventory” of these 5-gal jugs such that I can brew with the RO water but also have enough on hand for a 2 week emergency supply in case of societal breakdown (due to shortage of beer, no doubt). I washed the jugs with dish soap and rinsed them thoroughly prior to filling.

For those who store water for brewing or emergencies, are you treating the water or equipment any specific way? And at what length of time of storage would you begin to apply those considerations?

Looking forward to good water chemistry in the apocalypse!

314

r/Homebrewing•

Setting up for my 6pm Zoom meeting I decide to grab a home brew. I have a batch of Irish stout that is just about fully bottle conditioned and I put a bottle in the fridge the night before.

I pour the beer and it looks light. I knew I had watered the wort down to hit my target fermenter volume because I BIAB’d in a too-small kettle, but this was disappointing. Doesn’t look like Guinness at all. I Google Guinness homebrew recipes and videos, comparing the color from videos to my own. “Guinness is actually dark red” they say. Okay, mine’s pretty red, but not remotely black.

So I taste it. The roasted barley is barely coming through. It’s there, but so light. What the hell, is it that watered

9234

r/Homebrewing•

Hey all,

I acquired everything for a 5g SMaSH Mosaic IPA today, as well as some equipment for pitching a starter (flask, stir plate, and some canned wort). Brewfather tells me my OG will be right around 1.060, and my yeast for it is SafAle US-05.

My question is: Will I be okay to pitch just 1 dry pack, or should I pitch a starter from that? I see conflicting information about the value of pitching a starter from dry yeast packs. Alternatively, would it be more useful to pitch 2 packs of US-05 or is that overkill in this case?

My recipe is below in case that's relevant to the question, thanks!


Mosaic SMaSH IPA (All Grain)

American IPA 6.3% / 14.6 °P

BIAB (No sparge) 67% efficiency

310

r/Homebrewing•

I'm conditioning my first batch in bottles now (Northern Brewer starter kit). Everything I've read tells me that 2 weeks is a pretty safe lower bound for carbonation and further "cleanup" from the remaining yeast, so I wouldn't expect decent quality before then.

Is there any value in sampling one ay 7 days conditioning (+ a few in the refrigerator). Conversely, any recommendations on longer windows for comparison (say, conditioning 4 weeks, 8 weeks and trying then).

Solemnly swear that I'm not just try to sneak in a homebrew early :D. I realize this stuff takes a long time so I want to maximize my education in every batch. Thank you!

1748

r/Homebrewing•

I’m on my second batch and with the help of this community and copious amounts of YouTube videos, I have learned enough to get myself into some creative trouble.

I decided to do a BIAB Irish stout. Brewfather has a profile for BIAB, great, set your target fermenter volume and work back from there to set up the grain bill for the OG, hops and yeast, this is gonna be easy.

Brew day arrives (after starting it at 9pm I understand why they call it “brew day”). Get the kettle out and look at the prompt from Brewfather. “6.74 gallons of mash water, 7.5 gallons of total mash volume”. Welp, some jackass only has a 5 gal kettle and apparently no critical thinking skills.

So I improvise. Mash my 10l

218