grimnar

Hello everyone

Lately I`ve had issues with what I can call a resonating frame! At given speed and gear, the bike sounds like something are about to come apart! It resonates kinda loud and other people look up and wonders whats wrong with the bike as well!

Anyway, I think I have ruled out everything but the rear axle. I hooked up the rear axle with a battery drill and I used tape as a conveyor belt turning the the axle. And I could almost create the same resonating sound as If I where on the bike riding.

So the question is: Are there any bearing I could change on the rear axle or do I need to swap it all out? I did a small maintenance on the axle when I took it apart last night. (Cleane

Hello everyone

So I have this site with several Axis cameras but none of them utilize the motion app on the camera. What do I need to in Milestone to create a basic view with that only shows that motion.

What I have done so far:

Enabled metadata events and analytics on "Device -> Metadata -> Camera"

But in Axis Optimizer, the Metadata and search on said camera is still greyed out?

Assuming this will work, what do I need further on as in alarms, event and so on? I have been a Milestone operator for years now, but hardly ever opened the management server. As an operation I really wanted a view that can handle motion of lets say perimeters etc that hardly get any motion. But as soon t

I`m trying to access my webserver with both IP and domain.tld - everytime I try to access the webserver via the IP it always forces me to domain.tld - how can I setup nginx to both allow ip and dns?

I need this cause tailscale and dns setup at work does not play well. This is a internally hosted domain so it`s kinda wonky already. I have tried with server_name ip; already in the domain.vhost and /etc/nginx/nginx.conf without any luck

Hello everyone

I have debian 13 running at work where it's running librenms on a 192.168.0.0/24 network with no internett access.

There is also another network based on 10.10.0.0/24 where I can access the internet. This is connected via usb-c static network. Now, there should be internet on this network but I cannot get it to work and I think it as to do with routing. There has been some googling to this issue but I get confused pretty quick! How can I get routing to internet working and routing to the lan (192.168.0.0/24 working correctly?

This is my current /etc/network/interfaces

# The loopback network interface
auto lo
iface lo inet loopback


auto enp2s0

So I have had this issue for a few weeks now and I have no idea how managed to do this but sometimes when I try to anything in the terminal it spews out this:

MIB search path: /opt/librenms/.snmp/mibs:/usr/share/snmp/mibs:/usr/share/snmp/mibs/iana:/usr/share/snmp/mibs/ietf
Cannot find module (IANA-STORAGE-MEDIA-TYPE-MIB): At line 19 in /usr/share/snmp/mibs/ietf/VM-MIB
Did not find 'IANAStorageMediaType' in module #-1 (/usr/share/snmp/mibs/ietf/VM-MIB)
Cannot find module (IEEE8021-CFM-MIB): At line 30 in /usr/share/snmp/mibs/ietf/TRILL-OAM-MIB
Cannot find module (LLDP-MIB): At line 35 in /usr/share/snmp/mibs/ietf/TRILL-OAM-MIB
Did not find 'dot1agCfmMdIndex' in module

So yesterday I did run a aptitude update && aptitude upgrade and somehow rrdcached crashed upon upgrading. The whole system kinda hanged. Looked at the logs and something about fsck showed up. So I figured I needed to do a fsck on the disk, perhaps that would solve my problems.
Did a little google and google AI told me to enter force fsck upon boot in /etc/default/grup (can't quite remember the exact command and that google search is on another pc)

Anyways! I reboot the computer (headless) and went home (this is a server at work) - came back today and I could not reach the server. Hooked up display, keyboard and mouse and rebooted the server, only to find this grub menu: [Grub](https://i

So I`m having issues with nginx on Debian and are in need of working config files for nginx with ssl enabled.

/etc/nginx/conf.d/site.conf (with ssl) and /etc/nginx/sites-enabled/site.vhost

If anyone can post their setup with redacted info that would be really great! Debian 12 btw. Reason for this is I have "followed" several sources now and probably made more errors than good, and due to time crunch I cannot walk back all my errors in time for a big network test.

So I´m having issues with the rear brake, I can almost squish the lever all the way in the brake handle! So I added a few drops of hydraulic oil and swapped the brake pads to a new set. Still the lever goes all the way in! Where as the front brake lever only goes so far before it brakes 100%

So the last remaining thing is to swap the rotor then? Correct? I´m not sure how old it is, but probably a few years now! Or am I having air issues?

Hello everyone

Maybe I'm doing this the wrong way but I'm used to Adobe Lightroom when doing white balance. There I just press `W´ and the LR switches to the whitebalance color picker - very convenient!

Now in FCP I need to go through several clicks just to have the picker on hand, and I just tried to add a custom keyboard shortcut to let me have the picker on hand but no, I just added several Color Adjustments! (then I have to go in the change from automatic to picker anyway!)

Is there a way to make `W´ (instead of insert) be the color picker??

So back in 2018 I mounted this with double sided tape. It came without any adhesive so that was what I got on hand and it worked until now. Is there a better way to do it?

Images