michael________

u/michael________


Hi all.

I've recently bought an RTL-SDR v3 dongle and started getting into the amateur satellite imagery hobby. So far I've built a double cross antenna with moderate success, recently receiving my first clear APT image (NOAA 15). I decided my next target would be to try and receive MeteorM2 LRPT, as it was my understanding the same antenna I built for NOAA APT should work. I waited for a nice high 83 degree pass and tuned in.

For some reason the SNR was very poor compared to what I got with NOAA and I couldn't get it any better throughout the entire pass. Looking at the constellation diagram in the SDRSharp Meteor demodulator plugin, it was a complete mess, even at the highest elevation,

29

r/thinkpad•

E15 battery life problems

Question / Problem

I've recently bought the ThinkPad E15, wasn't my first choice but had to buy whatever was in stock locally due to the current apocalypse.

Overall I've been happy with it, but had some issues with battery life. It has a 45 Wh battery, and on the Lenovo website it says up to 12 hrs. Now I wasn't expecting that much, but right now it doesn't even last 3 hours.

Is this normal? With a fairly high load (got 2.5 hrs with two intellij ideas, vscode, chrome with a bunch of tabs, and Skype) is this the most I can get, or is there something wrong with my settings?

13


r/RTLSDR•

Just got an RTL-SDR v3 Dongle last week and I've been exploring what I can do with it.

I found a signal that is pretty clearly POCSAG, but I can't seem to get PDW to work. I can see PDW is recieving the signal through VB Audio Cable, the VU meter goes up, and it even correctly identifies the signal showing PCOSAG1200 in the title bar every time a packet comes through.

For some reason it still won't show any messages. I don't even get the signal quality percentage showing under the VU meter. I guess I'm doing something wrong but I just can't figure out what I've missed.

I've tried three different versions of PDW, changing the sample rate in SDR#, in PDW and VB Audio Cable, adjusting the ga

14

r/thinkpad•

I'm looking to buy a new laptop, and after having some bad experience with build quality on my previous laptop, thought I should look into a Thinkpad. Budget is around $1000. Display of at least 15' is a must. Purpose is mainly programming work.

Looking through the workstation models I found the Thinkpad P53s. It has almost everything I wanted: Good selection of ports including thunderbolt, nice display, good RAM and storage options and some dedicated graphics (don't need anything too crazy, I'm not gaming). Only thing that annoyed me was the processor. Why is this relatively new laptop still on 8th generation CPUs from almost 2 years ago? Why can't I find almost any laptops with 9th Gen CP

212


r/factorio•

So a lot of people were complaining that the bot sometimes returned wrong links. There's no easy way to completely fix this, since it's the mod portal's fault, but I did partially fix it. Now, the bot will try to find the name you search for in the title of the results (case insensitive), and return the first result that matches (ordered by downloads) that it finds. This also works if you do a "link n mods" command. I hope this will make the bot a bit more reliable. Please report any issues you find so I can look into them.

1913

r/Cubers•

Hi Guys!

I've been working on the bot, and finally have the first version done. You can check out what functionality it has here.

It is currently running on r/michael________, so you can test it out there. I don't want to run it here until I get explicit permission from the mods. I messaged them but they haven't responded. If any of the mods are reading this, can I run the bot here?

It's now running here!

A couple notes:

  • The bot is currently running on an old NUC in my house. My internet connection isn't that good, but hopefully it will be good enough.
  • The bot checks for comments every 2 minutes.
  • The reddit API has a th
6842

r/Cubers•

So I've recently built a bot for r/factorio, that link to mods from the factorio mod portal on request.

I thought maybe I could build one for r/cubers too. I don't really have any good ideas for what it could do, but I thought maybe some of you have ideas.

So do any of you have any ideas for a useful bot for r/cubers?

EDIT: Ok, thanks for all the suggestions everyone. I think I'll start with the algdb linker, scramble generator, and alg.cubing.net ideas. The others are a bit trickier, but i'll see what I can do.

16129