poolastar

Hi all,

​

I got an ESP32, with the intention of installing tasmota on it.

​

I tried to follow the instructions found here:

https://tasmota.github.io/docs/ESP32/#flashing

​

The command mentions these files:

​

bootloader_dout_40m.bin

​

partitions.bin

​

boot_app0.bin

​

tasmota32.bin

​

I guess the first three files are meant to be downloaded from

​

https://github.com/arendst/Tasmota/tree/firmware/firmware/tasmota32/ESP32_needed_files

Buonasera a tutti. Scrivo qui perché c'è qualcosa che mi sfugge, e non riesco a venirne a capo.

Tempo fa ho installato una di quelle distribuzioni di Debian preconfigurate per fornire un servizio su una vm. Ho creato un volume logico con lvm da 7GB, fatto partire l'installazione dalla ISO senza fare troppa attenzione alla configurazione, lanciato la vm che ha funzionato fino ad oggi. Fino, cioè, a quando ha finito lo spazio.

Vabbè, no problem, espando il volume logico a 10GB. Fatto questo, guardo la tabella della partizioni e mi accorgo che l'installazione ha creato uno swap da 1gb alla fine del volume. O meglio, quello che era la fine del volume prima dell'estensione.

Ok, dall'host (l

Hi all,

This may be an incredibly stupid question, but I was trying to install node.js on my openwrt and opkg said there was no such package.

Actually, looking through the repository, I can't find it:

https://downloads.openwrt.org/releases/19.07.4/packages/mipsel_24kc/packages/

however, the package page, it show "19.07" as the OpenWrt version...

https://openwrt.org/packages/pkgdata/node

Could you please help me spot what I am missing here?

Thanks in advance.

Hi all,

I started to write this hoping to spot the issue before posting, unfortunately it does not seem to be the case.

I'm having a issue with dnsmasq. Basically, DHCP doesn't seem to work. It should be something trivial, but I'm currently lost.

So, here is the dnsmasq.conf:

interface=ens11
dhcp-range=192.168.10.50,192.168.10.250,12h
log-dhcp

My network interface:

$ ip addr show dev ens11
5: ens11: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
		link/ether 52:54:00:2f:15:69 brd ff:ff:ff:ff:ff:ff
		inet 192.168.10.10/24 brd 192.168.10.255 scope global ens11
		   valid_lft forever preferred_lft forever

Hi, I am using a brige on the host to provide access to a VLAN to a VM. The bridge is configured with systemd-networkd. Everything seems to work fine (the VM can access the VLAN as expected), but only if I manually set the bridge status to "up" with 'ip link set up dev br-10'.

I haven't found a configuration option to have systemd-networkd create the bridge in status up, without assigning an IP address to it. Here they seem to imply that the interface should go up as soon as some client uses it, so maybe the issue is with libvirt?

Thank for reading this.