vrpc

u/vrpc


r/ZeroMotorcycles•

https://preview.redd.it/gs5ef8d18bfh1.png?width=1236&format=png&auto=webp&s=1b295a40d55463380b481fe299e62b7875958fa2

My main question is, is this worth it at this price if the battery is shot? Worst scenario is the charger died then the batteries sat long enough to discharge damaging them.

I'm a skilled at electronics and have rebuilt escooter/ebike batteries and replaced BMS and controllers. This is would be my first time working on something more sophisticated and higher powered. There is a good chance this battery is fully dead but there is also a chance I could revive it by charging it up manually or replacing bad cells. Are there ways to check this thing even with a dead battery? The

45

r/crealityk1•

Note: I bought the K1 Max used with the CFS kit installed.

I had a bad failure where the filament clogged up so bad it wrapped around the heater element (also forgot the silicon sock when swapping the nozzle making this more my fault). I tore it all down and had to hot knife through the plastic to get to the bolts to take it out.

Anyway, I removed the belt from the hotend to make access easier and now I can't get it back on. I have watched all the videos but the tensioner does not move a MM with that bolt. Yes I loosened the two screws first, and if I tighten the tensioner bolt any more its guaranteed to break something. I missing something or my setup is not standard for me to be having

13

r/Ring•

Can I replace the SIM card with a service that has unlimited data and turn it into a kind of mobile Internet service? I don't need much data speed for my alarm location and getting a SIM with unlimited data would be way cheaper than getting a wired connection. Is this even possible or do they lock down the devices?

13

r/ElectricScooters•

The BMS in my S5 is bad and I got a generic one but the old one used I2c to read the battery. This means the scooter thi KS the battery is dead/bad and shuts off after 10 sec.

Where can I get a working replacement or disable this 'feature'. As a last resort I could replace the throttle and/or controller but that doesn't seem like a great alternative.

Ps: The old bms was only outputting 28v while the pack was at 38v and wouldn't charge.

13

r/AmongUs•

I help organize a local LAN group that has went online for many months now. Participation has wained and I wanted to try out Among Us with the group and hand out some free keys to people that want to participate. The fastest way I can think of how is with steam key codes but can't find an easy way to do this. I could send as a steam gift or even itch.io gift but would take a while and I would need info from every participant. Is there a way to buy keys legitimately or a way to convert a steam/itch.io gift into a code?

20

r/playrustadmin•

https://github.com/zybeon/RustOxideAutoUpdater/

I wanted to make my server automatically check for updates, not only first Thursday updates but also adhoc updates like last months Chinese New Year update that left my server offline for a few hours. Where I work I can't have my phone on me and the vast majority of remote managing options are blocked on the firewall. I found webrconjs from looking through this subreddit and with a little tweak it is working well now to quickly send rcon commands through a bash script. You could also set this up to run rcon commands as cron jobs!

The script is meant to be run every 5-10 minutes and checks fo

15

r/lightsabers•

So I went with a Saberforge redeemer to get a ROTS Obi-Wan hilt and didn't want to pay the markup for the sound but wanted an led so could use it for an event coming up soon. I want to pick my own soundboard such as the proffieboard and probably switch to a neopixel blade later to make up for the poor lighting of the thin necks (which will pose its own challenges).

Anyways. They installed a switch in the pommel and didn't provide any switches in the actual switch box. There are just two empty square holes under the switch plate. It looks like it takes tactile switches but the exact type and size I don't know. I do have a few tactile switches on hand and fit in the square hole but none were

30

r/radarr•

EDIT: Solved, issue was to a nginx config of the reverse proxy.

​

I just get the loading 'dots' and the page never loads the main ui.

​

I have attempted to uninstall Radarr completely (deleting the Radarr AppData folder) and reinstalled with the latest release but to no avail. Additionally I can't enable Debug logs by setting the log level to debug but an automatic line is added setting it to info.

​

Ubuntu 18.04.02 LTS headless

mono updated to latest version

Web UI issue in desktop Chrome and Android Chrome browsers.

​

I also have Sonarr installed and it is working properly, so issue is more than likely not mono or other shared OS settin

59



r/smartwatch•

I work in a SCIF and I am looking for an inexpensive (<$60) fitness watch with an accurate continuous HR monitor. Can only have Bluetooth communication and can not have an integrated USB port. The second one pretty much means it requires to have a proprietary charging cable.

I didn't find a fitness watch subreddit so I hope this is ok here.

Required feature

  • Bluetooth
  • Continuous Heart Rate Monitor
  • Message push feature to include Facebook/Hangouts
  • Water Resistant

Would like

  • GPS
  • Waterproof
  • Changeable clock faces
  • Color screen
  • Weather Display
  • Run/Bike tracking
  • Sedentary notification

Restrictions

  • No WiFi/cellular radio
  • No mic
  • No bu
35

r/cade•

I am setting up a 1 vs 1 double elimination tournament at a local LAN party. It should be a game easy to pick up and play for people who may have never played arcade games but everyone attending are gamers. There will be around 20-30 people at the event but I expect only 8-10 to participate. I plan on providing this list of games for the contestants to vote on for their game of choice.

937

r/stm32f4•

First, I am looking to make it as cheap and accessible as I can. I will be using one of the many Lightsaber github projects as a base code, LightSaberOS/FX-SaberOS.

1 or 2-cell battery/MCU/IMU(I2C)/microSD(SPI or SDIO)/Mono Speaker(I2S)/4-6 high power LED driver(PWM)/2-6 status LED(GPIO or PWM)/2-4 buttons/4.2v or 8.4v charger.

This would play wav files from an SD card, using the IMU to play certain sounds and the gyro to change the pitch of the hum sound file. Specifically designed for RGBW 4-channel LED driver with footprints to add two MOSFETs for up to 6 high power LEDs.

I am looking closely at the STM32F401. Though might be able to get away with the F103, L0, or L1. Low power draw is

22

r/cade•

What I am asking for is suggestions on a 2 player controller kit (6 button+2x coin/start). I'm not looking to spend that much also considering that I already got all the other parts together, Rpi3, SD card, power supply. Amazon and multiple ones ranging from 50-100+ and wanted some feedback.

I built a bartop before and this friend helped me cut all the wood for it. He said he wanted to make one too but didn't know how to do all the wiring himself and the software parts. He is a hobby woodworker and loves to make stuff in his shop. So as a surprise, I am going to get everything together for him minus the box which will "force" him to have to build a wood box for the rest of it.

Plus his son

84