wolfmann
u/wolfmann
- Checked all fuses and relays (labeled HVAC or AC) - none faulty; originally thought the clutch wasn't engaging
- Low fill side on my cheap pressure dial is reading around 140 psi, does not lower when compressor engages
- Compressor and clutch appear to be turning; there appears to be grease coming out of the end of the clutch which was radially sprayed about the engine compartment
- Jumped the Low Pressure switch with a paper clip, no change
- Low and High sides are the same temperature to the touch
- Was working on the 4 mile journey to pickup my travel trailer, stopped working on the 4 miles back home. It wasn't working awesome, but it did blow cold air.
I do have the Automatic T
Xantrex seems to be the only company doing this, but I've heard really bad things about them. Anybody else install an automatically switching shore power/inverter power system? I only really need <1000W pure sine on the inverter (2x CPAP's + lights + one TV)
Anyone know if that is illegal in certain states? It should not block headlights/turn signals.
Front Hitch Cargo Carrier w/ Generator
Suburban
Rear Hitch 27' Travel Trailer
all weights and GCWR I'm well under max; I've only seen a few posts on the internet in general asking the same thing.
Just curious if anybody out there does some contract work on the side. And if you could, tell us the good, bad and the ugly parts of it.
I'm just curious how do references work out when you are basically working as a single sysadmin. There are no other people who you work a lot with for a good technical reference (e.g. co-workers literally play in the soil). The next probably closest person is in another company or a state away that gets what I do. How should I approach this?
Just curious if anyone has seen something more than s3cmd that is reliable to backup to Amazon Glacier. Or would running some EC2 instance (with rsync) be the easiest/most reliable way?
Currently I have 8 Netgear GS724Tv2 switches; they've been running wonderfully for the last 6 years (guess I'm the exception?); I've come to the point where I'd like to be able to see which MAC addresses go with what port (v3 supports this), as well as having 10G uplinks; there is no LACP support on the v2 of the switch (v3 again has it).
I'm curious about a few things
- Subscription fees? Annually recurring costs?
- MTBF in a 100 F attic (year round) - longer or less life?
- 10G cost/port seems super high still
- I'd like it to be in Netdisco
- Cost is key, would you buy a used switch (Cisco, HP, Juniper, etc - not Linksys or home switches) off eBay?
I'm not sure if I should be aski
My wife has a few savings accounts setup for our children, obviously the returns are next-to-nothing so I was wondering what should I put them in if we aren't sure that they want to go to college (I don't like the 529 plans so much due to penalties).
Also is there any investing product for college that is more risk now / less risk later similar to some retirement funds?
I have the following: Meter (200A) -> Outdoor Siemens W0816B1200CT -> Indoor Siemens M3040B1200
Only my outdoor load center will support an interlock kit (Siemens ECSBPK03) Is it OK to put this kit on the outdoor LC + a 30A 2-pole breaker for backfeeding from the generator?
Ideally I'd like to be able to buy a 200A DPDT but they run >$1,000 from what I can find.
Also my generator has an L14-20 outlet on it, is it OK to wire everything for 30A except for the L14-20 male plug (basically I'm looking to upgrade the generator later) A Gentran 6408 kit has this setup it looks like to me.
I am in North-Central Indiana if that is any help (just barely inside lake-effect snow). Also I'd