Unifi switch doesn't work with particular cables but the cables are fine

EDIT: Resolved

I ran cat5e and cat6 cable throughout my house. There are 8 jacks that all go to a Unifi 16 POE Lite switch. I have an AT&T gateway (BGW320), I plugged it into one of the jacks. My expectation is that the other 7 jacks should have wired access to the LAN and internet.

4 of the 7 jacks work as expected. I can connect my computer (Macbook Pro with the monoprice usb-c to ethernet adapter) to those 4 jacks and everything works great.

The other 3 jacks do not work. If I connect to them, I have no access to the LAN or internet. The port on the switch does not light up green. All signs point to bad cable. BUT, if I connect the AT&T Gateway to those 3 "bad" jacks, then unplug the other side of their cable from the switch and into my computer, it works great. I have also tested them with one of those $10 network testers and 1-8 all light up in order. The cables work fine.

I have randomly changed the ports on the switch that each cable is plugged into, both POE and non-POE, and the same 3 jacks don't work and the other 4 work fine. So it doesn't appear to be the ports.

So if the cables are fine and the ports are fine... what is could be going on here? I've run out of ideas.

Posted Mar 8, 2022, 2:34 AM UTC · edited

513
Loading comments…