Hi,
i've followed the instructions as per https://github.com/mainsail-crew/moonraker-timelapse , but the timelapse option is not showing up in neither the settings page, or even under update manager.
anyone has any clues where could i have possibly gone wrong?
thanks!
Posted Jul 14, 2022, 3:21 AM UTC
Did you restart mainsail/reboot system? Firmware restart is not sufficient.
Yea I did. I even turned off both Pi and the printer and back on again
Do you get an error displaying on your notification Bell. I had this issue too. I was getting an error with my moonraker.cfg. so it was loading a backup Moonraker file. Once I fixed my issue with Moonraker config I rebooted and it all came up.
ah u r right. no idea what went wrong tho.
here's my moonraker.cfg
[server]
host: 0.0.0.0
port: 7125
enable_debug_logging: False
klippy_uds_address: /tmp/klippy_uds
[authorization]
trusted_clients:
10.0.0.0/8
127.0.0.0/8
169.254.0.0/16
172.16.0.0/12
192.168.0.0/16
FE80::/10
::1/128
cors_domains:
http://*.lan
http://*.local
https://my.mainsail.xyz
http://my.mainsail.xyz
https://app.fluidd.xyz
http://app.fluidd.xyz
[database]
database_path: /home/pi/.moonraker_database
[file_manager]
config_path: /home/pi/klipper_config
log_path: /home/pi/klipper_logs
[octoprint_compat]
[history]
[update_manager]
channel: dev
refresh_interval: 168
[update_manager mainsail]
type: web
channel: stable
repo: mainsail-crew/mainsail
path: ~/mainsail
[update_manager timelapse]
type: git_repo
primary_branch: main
path: ~/moonraker-timelapse
origin: https://github.com/mainsail-crew/moonraker-timelapse.git
[file_manager]
enable_object_processing: True
[timelapse]
## Following basic configuration is default to most images and don't need
## to be changed in most scenarios. Only uncomment and change it if your
## Image differ from standart installations. In most common scenarios
## a User only need [timelapse] in there configuration.
#output_path: ~/timelapse/
## Directory where the generated video will be saved
#frame_path: /tmp/timelapse/
## Directory where the temporary frames are saved
#ffmpeg_binary_path: /usr/bin/ffmpeg
## Directory where ffmpeg is installed
I got the same outcome after following all the steps. Did you make any progress?
Same here. Anyone ever get this working?
Have you looked into moonraker.conf and uncommented the section for [timelapse]?
Did you add [include timelapse.cfg] to your printer.cfg?
yep i did.
Have you looked into
moonraker.confand uncommented the section for[timelapse]?https://i.imgur.com/LpPVM9x.png