HTL2001

u/HTL2001


r/factorio•

I'm traveling for a few days and installed Factorio on my laptop. While steam sync worked for saves, settings were set to default, which includes the blueprint sync option.

I'm not sure when but my blueprint storage got lost. It might be when I restarted to install the mods needed to play (deleted) or when I enabled the option after that (replaced with newer, blank file). Lucky for me my home computer is off so I'll restore it when I get back, and I'll also test to see where it actually goes wrong.

10


r/SatisfactoryGame•

https://imgur.com/a/pVJAXz8

Previously I hadn't really got into nuclear power because I didn't like the idea of waste buildup. I know it'd take forever, but it still bothered me.

In comes update 4 and I decide to go with sinking the reprocessed fuel rods. I also wanted to keep the area as traversable as possible without using the hazmat suit. I'd always used manifold designs but figured balancers could help me here

The result is pretty good, though the last update kinda screwed over my reprocessing area a bit. Still was fun designing something that had a good reason to use balancers though.

60

r/SatisfactoryGame•

So I was listening to the launch stream and heard something about how the game saves removed objects, so they don't respawn when map changes are made.

I'd been going a bit crazy in update 3 with the rocket launcher mod, to rapidly deforest some areas of the map for future use, and was curious how much this inflated my save size. A quick look at the autosaves while doing this showed me it might be significant so I fired up a save editor...

A screenshot from the save editor: https://i.imgur.com/zxobo7d.png

removing the entire tree there reduced save size from 7280KB to 2738KB

Thankfully, this doesn't seem to have a noticeable impact on save times, so I'm not tempted to respawn all the for

96

  • IMPORTANT this was done before the current testing patch which drastically improved performance for my current save (200 dupes)

There's a lot of things that get cited as lag sources, some of which I've tested out by loading my save into sandbox/debug and removing stuff that's been suggested as lag sources. For instance I had a save a while ago with 300+ slicksters, and while deleting them made them move more often it didn't help framerate or max speed, nor did removing most of my dupes. It wasn't until I started removing lots of buildings on that one that performance picked up.

So, I decided to try something that helped in Factorio, when my UPS went down to about 40, I thought it was t

611

https://imgur.com/a/hHOiPTz

the marked spot keeps breaking (tile is still present but it gets bright and allows material through)

I'm not sure exactly what happens because its intermittent but it seems some sort of liquid boiling happens. That spot used to be much lower, I raised it in hopes of stopping it from breaking again but it keeps happening

413

So after several bases where everyone was in atmosuits 99% of the time, I decided to run this base mostly suitless (and at 200 dupes but that's another post). I wound up with a lot of metal volcanos, so I made this

https://imgur.com/a/Jeoi0Eh

Even if dupes immediately pick up the metal, it should be cool enough to not cause scalding, and the heat/cooling shouldn't leak too much into the rest of the base

notes are in the album but I'll copy here:

Most of the insulation is ceramic, the other color is igneous rock, used more for thermal buffer

Tempshift plates inside are obsidian (fill all space that doesn't touch insulated tiles), outside are granite. Note there are 2 in the bottom of t

1213

https://forums.kleientertainment.com/forums/topic/103110-mods-material-probe/

In particular I really liked the temperature mode, it let you see fluctuations in areas with similar temps, or in areas that otherwise pegged the meter. I'm currently using CustomTemperatureOverlay but that is mostly to distinguish extremes, material probe would adjust the min/max dynamically based on the stuff you highlighted. Last I tried this mod was very unstable on newer versions of the game.

40

Not sure when this happened (if I missed it in patch notes or on here) but replacing pipes with the same type but different material (ie igneous rock insulated pipe -> ceramic insulated pipe) works properly now, plus, it also properly sets priority from the build menu instead of setting it to 5 for the replacement pipes

Slightly related, but I don't remember if the pipe overlay would usually let you see replacements on its screen, but it doesn't right now. Not sure if a change or just how its always been.

43


I just noticed this when I had a few storage compactors storing high temp items. I something melted into dirt and entombed a few of my compactors which promptly got up to temp with their contents, meanwhile nearby compactors with similar mass/temp are only slowly getting up to temp. I think this might have something to do with the entombing block also counting as entombing the contents of the compactor itself but I'm not sure

11


r/archlinux•

Somewhat recently (between 1-3 weeks ago I'd estimate) TigerVNC stopped scaling up VNC connections where the host was set to 'normal' dpi (96) and now displays everything really tiny on my laptop. I'm curious if anyone else has noticed this or knows of a good workaround.

20

r/DataHoarder•

I'm using ZFS under arch, raidz2. I got 8x 6tb white label drives (will post something more on this later, tldr is that I had to rma 4 of them, 2 at a time due to when they indicated failures). The drives show up like this:

[    1.510278] sd 2:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[    1.510349] sd 5:0:0:0: [sde] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[    1.510414] sd 7:0:0:0: [sdg] 11719780128 512-byte logical blocks: (6.00 TB/5.46 TiB)
[    1.510473] sd 3:0:0:0: [sdc] 11719780128 512-byte logical blocks: (6.00 TB/5.46 TiB)
[    1.510487] sd 6:0:0:0: [sdf] 11719780128 512-byte logical blocks: (6.00 TB/5.46 TiB)
[   
310