
Squaved
u/Squaved

So I recently snagged this bag for 20$ since it looked eerily similar to a Filson Computer Bag, but the brand is kinda throwing me off. Does Filson engage in white labeling?
I still haven't gotten the bag yet, and these pictures were the seller's photos.
Hello guys!
I recently made some component swap and going from a larger case to a smaller one.
Ryzen 1700x
Asus B350 F Gaming
DDR4
To
Ryzen 7800x3d
DDR5
Asrock B650i Wifi Lightning
But whenever I boot up my my pc, it goes directly to the Bios. Checking around it seems like everything is detected properly. All my storage devices are listed, ram and cpu too. But there's no bootable devices found which is likely the culprit. I'm not sure what to do, I think I used an OEM license Windows 10 for my last motherboard, which is probably the reason as to why I'm stuck atm. Since I've read that one OEM license per motherboard.
https://preview.redd.it/mrofm4av55ad1.jpg?width=4032&format=p
Hello!
I recently made some component swap and going from a larger case to a smaller one.
Ryzen 1700x
Asus B350 F Gaming
DDR4
To
Ryzen 7800x3d
DDR5
Asrock B650i Wifi Lightning
But whenever I boot up my my pc, it goes directly to the Bios. Checking around it seems like everything is detected properly. All my storage devices are listed, ram and cpu too. But there's no bootable devices found which is likely the culprit. I'm not sure what to do, I think I used an OEM license Windows 10 for my last motherboard, which is probably the reason as to why I'm stuck atm. Since I've read that one OEM license per motherboard.
So quite some times ago my danish friend sent me a video. The YouTube video was what I presume a tv program about a middle aged danish man . Trying to find a foreign wife I think it was specifically thai. But, the thing that stuck out the most was this guys somewhat peculiar creepy laugh it's so hard to describe. But I just can't stop thinking about it.
Does anyone know what tv show I'm talking about?
Edit: accidentally mixed the nationality
I'm trying my best to translate everything from swedish to english, so if there's some clarification needed i'll try my best.
I basically got stuck to the following question: which is more thermal stable, CO2 or CO (normal room temperature and pressure)?
So i argued that a CO should be more thermal stable because of the triple bond and the higher bond energy (1077 kj/mole), compared to CO2 which has double bonds with less bond energy (805 kj/mole). I'm thinking a higher bond energy, means more energy needed to break the bond which should lead to a higher thermal stability.
But the answers says the it's the opposite and they refer to the enthalpy of formation instead of bond energy. Wherea

I'm currently using a Chrome Barrage for my daily drive to school. But there's time before i head home that i go grocery shopping. And sometimes i end buying a plastic bag to be able to hold all my stuff.
I'm just checking if there's any lightweight packable tote bag. That can be for example stuffed into the water bottle compartment.
So i'm planning on soon moving out to a very small student apartment. And i've decided to skip the 5.1 surround sound setup altogether because lack of space, and I just hate cables.
So i was planning on maybe getting a soundbar just to up it a little bit alteast. But i'm not sure if i should skip buying a 500€ ish soundbar and instead put all the money in the TV instead. The TV will probably be used mostly for gaming when guests are over.
Budget: 500 €
Source/Amp: None, or the computer.
How the gear will be used As a supplementary to my current headphones Fidelio X2s, when things gets abit louder in my household or when i wanna keep the sound to a minimal. So a closed back is a must.
Preferred tonal balance/Music genres: Not much of a preference i really like my current Fidelio X2s, Master dynamic MW07 and Bowers Wilkins PX. But i'm just worst at describing sounds so i'm not gonna dwelve too much into it. I prefer slightly more bass, but i'm not too crass about it.
What aspect of your current listening experience would you like to improve? Comfort>Sound. I wear eyeglasses if matters.
So i've been playing around with the preinfusion feature on the Bianca. And it got me thinking when i should start my timer and how much preinfusion is necessary?
My current setup is 10 second on with around 4.5 bar and 10 second completely off (not a drip goes through). And then return to max pressure for around 20 sec. Should i tweak something in my settings? Is my preinfusion abit overkill?
I'm planning on moving soon from my parents and i've gotten 2 Global knives (bread & pairing) for free and i'm now in need for a proper all-around knife. I've only glanced at certain knifes brands and i've taken an interest in damascus steel because of the looks.
1. Style? Japanese
2. Steel? Stainless
3. Handle? Japanese
4. Grip? Pinch
5. Length? 18,20 & 21cm
6. Use cases? The uses outside of the bread and my pairing knife.
7. Care? Whetstone, i have yet to learn to use one but i'm willing to learn
8. Budget? 300€
I'm currently on the lookout for a second grinder that's gonna be manual. I already have a Eureka Mignon Specialita that's only used for Espresso. The plan was to use the second grinder mainly for v60 and French press (Espro P5).
My budget is 220€ maximum, i've looked into the more of the highend grinders, but i'm not sure if it's really worth it if it's mainly gonna be more of a coarser grind. Should i just get a entry level cheap Hario grinder or just go straight to the high end?