TechJay81

I don't have access to a lot of material for Hunter x Hunter minus Netflix. So I saw the first two arcs. Hunter Exam and York New. Then Hulu came out with the Greed Island arc and that was great.

I accidentally found a site called tubi. For a few commercials, it's a free stream site. Had the entire Ant arc. What luck. (NOT A PLUG JUST EXCITED COINCIDENCE)

So I start watching. Meet Kite and get excited. Then have my heart ripped out. Awesome start.

So I keep plowing through. Get a bit farther in and really start to dig the way thing are progressing.

Netero is getting screen time and I'm digging his attitude. Knuckles is a bit outrageous, but I can see the appeal. Perfect matching f

As an automotive technician, I have a keen grasp on many different aspects of vehicle design including cross matching from make and model to fabrication. My intended goal is to modify my steering system.

My wife's 2013 Focus has electronic steering. My Taurus has hydraulic steering. I'm curious as to what makes and models cross with my Taurus.

As a Honda guy, I have gotten very use to taking parts from one vehicle and using it on another. An example of this is replacing my Integras ABS system with a non ABS system from a Civic. Replacing the brake booster, master cylinder, and brake lines. Worked as expected.

With this being said, I'm curious if there is a model that shares

I accidentally left my lipo plugged in to my car for a few weeks. I went to take it out to charge it but my charger isn't switching over to charge at all. I'm using a Dynamite Prophet Sport mini 50w Multi-chemistry charger.

Is there anything special I need to do to fix this or did I ruin a good battery?

I have a battery charger rated at 20V and 1A of current DC. It's for both input and output that then plugs into a docking station. It's for a robot vacuum. The block that goes to the wall is were the conversion is done and the docking station is basically an intermediary for current from the wall to the robots battery.

My question is in regards to my dvom readings. I can see the 20V reading as 20.2V. I can't see an amperage reading. I have tried all the amp settings on my meter, from 200mA to 10A. I get mild fluctuations on the screen while moving the test leads around, but no solid output. If I'm reading the voltage as described I should be seeing a solid amperage reading too. Un