derwreck

u/derwreck


r/FJCruiser•

I've got a 2007 with over 215k miles. It's sitting on Bilstein 6112/5160 suspension with Icon UCAs and 285/70R17 KO2s. I've developed a clicking in the front end which I've narrowed down to the bushings on the LCAs. I figure with my mileage I'm better off just replacing both sides seeing as how the balljoints are probably overdue as well. I'm gonna go with OEM Toyota LCAs but then I got to thinking that I should probably replace the inner and outer tie rod ends on both sides and give the front end a total refresh. Do you guys recommend sticking with OEM for the inner and outer tie rod ends or is Moog an acceptable aftermarket brand? I'll be doing the work myself so I'm trying to save a few p

37

r/MechanicAdvice•

I recently purchased a 2015 STi about three weeks ago and unfortunately two of the lug nuts on the vehicle require a tuner key that the PO didn't supply. He gave the nine spline key for the majority of the lugs but two of the lugs on the rear have this weird 15 or 16 spline lug that I can't for the life of me find a key for online. At this point the owner is ghosting my texts even though he promised he was gonna mail me the key once he found it. Any suggestions on how to get this thing off? Everything I'm reading online suggests hammering a 17mm 12 point impact socket on it and letting it rip with my impact driver. I worry that the metal on this thing is gonna be soft and end up stripping in

14

r/SwitchPirates•

I managed to completely wreck the motherboard on a spare V1 switch that I was trying to mod. I'm in the process of sourcing a new/used motherboard but wanted to know if it was possible to swap a V2 motherboard into a V1 body (with all the corresponding V1 components). Will I run into any compatibility issues or connectors that won't match up? I tried googling this but all I could find was people asking whether or not they could swap a V1 mobo into a V2 body.

05

r/CODWarzone•

I occasionally get shadowy artifacts on Fortune's Keep and only on Fortune's Keep. The best way for me to visually describe them is that sometimes it appears as though there's a quick shadow being cast from overhead from like an airplane or something above. It doesn't happen when I'm in buildings but more so occurs when I'm outside. Never happens on Caldera or Rebirth island, always on FK. All video drivers are updated and I've already tried uninstalling and reinstalling the game. HW is a 3080ti, 9900k and 32gigs of RAM. Anyone else experience anything like this? My settings are cranked to the max but have vsync, ray tracing and motion blur disabled.

610

r/HomeNetworking•

I'm not 100% on how the routing would go if I utilize the PoE injector that comes with the AC Lite. I'm wanting to run PoE with my ER-X router and AP. Would the setup go something like Cable Modem -> PoE injector -> eth 0 on ER-X and then eth 4 on ER-X -> AP. I've read some instances of people frying their cable modem if the wiring isn't done properly due to the 24V being passive.

15

r/buildapc•

I primarily use my PC for gaming, I'm currently running an i7-7700k OC to 4.7ghz, 32gigs of ram, 1080ti and SSD all the way around. The most taxing game I currently play is MW Warzone, I've noticed subtle decreases in performance every time they release a major patch and minor instability issues here and there. I went from running a solid 120+ fps on the warzone map to an average of 80-100 fps. I feel as though my cpu may be a major bottleneck for me in the game, would it be more beneficial to upgrade to 1440 monitor instead of my current 1080p gaming monitor? Or would I see more of a benefit in upgrading my cpu to an i7-9700k? I figure that by upgrading to a better monitor, more of the burd

26


r/GoogleFi•

I recently decided to to back to Android Messages since I wanted to test out this whole RCS thing and my battery life has absolutely tanked. Anyone else notice this? Messages is consuming about 27% of my battery, whereas Textra was maybe just using 5-6%. Could this be an RCS related problem? Currently running a Pixel 4 and this is the first time I've seen 2 hours of SOT. The only thing I've done differently is begin using messages and enabling RCS, can't think of anything else that could be the culprit.

45

r/MechanicAdvice•

Been working on cars for nearly 16 years now, primarily just my own vehicles out of my garage as a shade tree mechanic and was curious about one thing. Are there any negatives or drawbacks to using an impact driver to remove drain plugs? I've owned a few vehicles that utilized a stubborn hex bit as a drain plug and always felt like I was on the verge of stripping the plug even using a long wrench for leverage. I've always torqued my drain and fill plugs to factory specs but sometimes they're stubborn when it comes time to remove them. My Tacoma has a very shallow rear diff drain plug and unless you're dead center with your socket, you can easily round the edges off. The drain plug for the fr

210

r/Windows10•

Running Windows 10 Pro Version 10.0.17763 Build 17763 and I'm running into an odd issue with my clipboard memory. If I do a Ctrl+C to copy text in a browser like Chrome and then paste (Ctrl+V) to another area, I'm able to repeat this process consecutively without fail. After a few minutes, the clipboard memory will erase itself and I'm no longer able to paste the content I had copied before. I remember being able to Ctrl+C something, have my computer go into sleep mode and then still being able to paste upon waking the computer up. This is no longer the case. I've tried to Google a solution and can't find anything with a viable answer. I've looked into my clipboard settings via the Windows

24