needanew

u/needanew




r/fixit•

I have a Kenmore five burner counter top range in my kitchen island. One of the burner knobs will not adjust, its fully on at all times. Have to use the cutoff valve behind the drawers when not using the stove. I found the valve for sale but can not determine how to separate the top from the bottom. Do the screws holding the burners allow access to the internals?

10



r/Cartalk•

Blower was working only at max, found burnt connection on the blower control relay assembly. Replaced with new from the parts store. New relay/ control module smoked a little on initial power up, and no fan at all. Checked for power out--none. There is power to the relay, and all of the control wires have power when expected (as selected at the dash.) Old blower control showed 12VDC on red wire to fan. Replaced fan. Still no work. Found black wire to fan also carrying 12VDC when fan should be on. Ground wire from dash measures 1 Ohm to ground. Fan wires are both open to ground. Whats next? Did I wreck the new control relay with a bad fan? Ground Gremlins somewhere?

So I exchange

94

r/Cartalk•

If I change the seats to ones without occupant sensors, what do I do with the wires? VA safety inspectors won't pass a vehicle with an air bag light. Mine is currently on and diagnosed by my mechanic to the passenger seat sensor. I was already planning on switching the seats to some from an old conversion van. I really don't want to pay the $650 Chevy wants for the sensor.

20