r/fo4vr•
rdtg

PSA: DLC terrain fix + incoming DLC performance mod

https://www.nexusmods.com/fallout4/mods/28850
Nexus page for the performance mod

** The NukaWorld & Far Harbor files are up :)

ITS STILL UPLOADING! :P The main files are HUUUUGE (GB size)
So I went ahead and published the main esp, so as each worldspace rar finishes people can start downloading them :)

EDIT: First version of the performance mod is uploading to the Nexus right now. It's....pretty heavy. It will come in 3 parts, only ONE is required, but you can use all 3 if you want :)
REQ File: Base ESP 5.4 MB Part 1: Far Harbor - Precombined Meshes f/ Worldspace 1.9 GB
Part 2: Nuka World - Precombined Meshes f/ Worldspace 1.2 GB
Part 3: Commonwealth - Precombined Meshes f/ Worldspace 5.1 GB
I will be regenerating occlusion for these worldspaces, LOD and some other things and uploading those a little later on as the occlusion bit can take a while in the CK.
I'll post the nexus link here when it's finished uploading the first file (Far Harbor)

Let me start off by saying, this ini setting will fix the invisible terrain in Far Harbor and Nuka-World, but it will also degrade performance some. What I am doing is I am precombining the entire Far Harbor and Nuka-World worldspace to improve performance, and regenerating occlusion and visual.
I have already done this in a test area for both Far Harbor and Nuka-World, with the ini setting, the terrain is visible. Outside of my test area performance degrades a bit and adds re-projection, inside the test area performance shoots back to normal, if not even a little better due to everything possible being precombined.
Anywhos, here is the setting (Fallout4VRCustom.ini):

[Display]
bUsePreCulledObjects=0

That will make the terrain visible, but again, degrade performance a little. Now, onto another matter, if you happen to have the Conifers of the Commonwealth mod installed, the readme asks you to change two settings:

bUseCombinedObjects
&
bUsePreCreatedSCOL

It asks you to change these to a 0. This however will really degrade performance in the VR game as it's no longer allowing the game to use precombined objects and static collections.
I highly recommend setting them back to 1 if you have them on 0.
If you don't have that mod, then don't worry as they are 1 by default.
Now, the precombined meshes are almost done generating for Far Harbor, it takes quite a while for each worldspace. Vis and LOD don't take as long, but occlusion can take up to 30 hours for one worldspace. So the fixes should be up within a day or two depending on my schedule.
I will update this post with links once they are up :)

On the last note: I will also be uploading a fix for Automatron. I basically re-configured the trouble quest to make it so you don't need to build a robot for the first time. I set it to spawn it already done for you :P Once I finish testing ill upload it.
I'm also looking into the crashing issues that occur with Vault-Tec Workshop DLC. I think it has something to do with the workshop setup on some of the objects as crashing only seems to occur after placing certain things. I will keep everyone informed on this as well.

EDIT: Forgot to mention, once I am done fixing the DLCs, I will also run these fixes on the Commonwealth to try and gain performance there if possible. That one will probably take a while :P

Posted Jan 1, 2018, 3:59 AM UTC · edited

8232
EE9Chestnuts933•

You are a god my friend.

12
Moonstrife•

On the topic of Automotron, were you able to determine if the issue is with the robot creation scripts or just the interface? Being able to make automotrons to use for supply lines again would be super helpful.

6
rdtgOPOculus•

I haven't really dug into that yet. I'm just setting up a temporary workaround before I go in and try to fix the actual problem. My guess is that it is script related. Bethesda actually recompiled every in-game script, multiple times for the VR version so I assume some things need to be tweaked or changed. Then again, it might be the interface as the VR version has special settings for every interface in the game. This might be one that is missing and may need some sort of plugin (f4se style) to get working properly. I will keep everyone updated as I go along :)

3
Toilet-Raider•

Does anyone else have an issue with the thirst zapper in Nuka World? The water projectile somehow causes my game to crash.

Regarding the missing floor textures, I 've fixed it for Nuka World by removing the workshop DLC1. Haven't tried Far Harbor yet.

5
rdtgOPOculus•

I haven't gone that far into Nuka-World yet but I will look into it.
There are several ways to kinda fix the missing ground textures, some people have reported running with zero mods and one DLC doing it, others have reported removing certain DLC like you did. The fix listed in the post above fixes it no matter what mods or DLC you have, and I will be releasing a performance enhancing mod to go along with this within a few days.
EDIT: I will check on the projectile thing for the thirst zapper in a few minutes. Best case scenario I can make a simple workaround for you by changing the projectile to a bullet or something but keeping the same effect. Worst case scenario is I might have to replace it with a pistol until I fix it completely.

3
Toilet-Raider•

Awesome!

btw, the NukaTron enemies are causing the game to crash as well. Maybe they shoot the same type of projectile?

3
rdtgOPOculus•

Sounds like it could be the liquid projectile causing issues. Yeah once I'm done with the landscape stuff I will look into it. With the initial release i'll just have a workaround for those projectiles (I'll change them to bullets or something that works from vanilla Fo4VR)

2
chemicalgibbon•

Someone has released a Thirst zapper fix for VR on the nexus.

https://www.nexusmods.com/fallout4/mods/28842/?

Can't test as I'm not there yet gamewise, but if it works then it saves you some work!

1
surrealeusOculus•

Yup, thirst zapper is an instant crash for me too. I killed the sparky guy with crits instead.

2
Nye•

It sounds like a lot of progress is being made here - does anyone have any opinions on whether the DLCs are likely to work well enough for it to be worth buying flat FO4 GOTY in the Winter sale in order to get them?

5
surrealeusOculus•

So far, Far Harbor is working well for me but I'm having massive FPS problems outside in Nuka World. I haven't played around with the others.

3
heyimpotatoVive•

Tagging although we talked on discord already. Hooray !

4
zwabberke•

You are the hero we need, but don't deserve. But seriously, thank you for your effort. I kept holding off the DLCs in the 2D version as soon as I heard a VR version was coming and I was super bummed out that they weren't included in the VR version.

4
Japander75•

Really great if you manage to do all this by yourself and share with the rest of us! FO4VR with mods has revived VR gaming totally for me.

3
ZebrazillaOculus•

Fantastic work!

2
Joomonji•

Amazing! Does this reduce the crashes in Nuka World too?

2
evorm•

is this just for textures or will you fix some crashes the DLCs have (mainly the automatron crash)?

2
BK1349•

You're the man!

2
surrealeusOculus•

Nice, I've tested the ground fix in both Far Harbor and Nuka World and it's working. The open (outside) area of Nuka World is killing my FPS though (probably unrelated to the ini fix).

2
UmayCallMeBrotherNowVive•

Do these culling fixes work for interiors as well?

1
maduin81•

Maybe link to the original forum where the ini fix was discovered since this is more about your mod that's attempting to fix the underlying issue that the ini tweak covers up.

http://steamcommunity.com/app/611660/discussions/0/1621724915788591855/

1
rdtgOPOculus•

Actually, I kinda figured this out a while ago when desperately trying to fix the right-eye pop-in on Oculus Rift.... But sure ;)
If you look back on my earlier posts you'll see it
Edit: https://www.reddit.com/r/fo4vr/comments/7ju77k/it_seems_like_all_oculus_users_have_the_objects/dra4x1y/
There ya go :) Just so you don't think I'm a dirty theif :P

2
maduin81•

No worries, didn't think you were stealing credit, just quite a few folks spent a fair amount of time toying with fixes and thought they should get some recognition as well. XD

Strictly speaking, the ini tweak dates back to shortly after release so it's not really a new thing, was used to handle silly things like blowing up the world with Spring Cleaning mod and all that, it just so happens to 'fix' this issue as well since it's similar behavior.

https://forums.nexusmods.com/index.php?/topic/3943850-busepreculledobjects0-what-impact/

1
rdtgOPOculus•

Huh.... I didn't know that for Spring Cleaning :o
I was literally trying every object-related looking thing in the ini settings to fix my issues, stumbled on it on accident :D

1
CndConnection•

God amongst men. Hope you get showered in reddit gold.

1
ImmersiveGamer83Vive•

Not all heroes wear capes!!!

1
k4ssVive•

if I have done this mod https://www.nexusmods.com/fallout4/mods/978 should I still try this one?

1
rdtgOPOculus•

Yes. My mod doesn't change any textures :)
The Texture Optimization mod would make a good combo with mine actually

3
k4ssVive•

nice. thanks

1
mijouwh•

bless ur soul mister

1
TheJiggliestPooVive•

This should be stickied with how useful it is

1