Hoogs55

Does anyone know why on the FC website it says Parking is not available in the Playfair lot in 2025, however on SeatGeek they are selling parking passes for Playfair?

The scoreboard is a great change, now please do the cha-ching......please!

Looks good imo

Anyone else have KBG? I am still playing with the settings to see what I like. Since it's getting hot I have gone up from 2.5" to 3.3 or 3.5". I liked the look better short but I don't want to dry it out either. Has anyone cut it higher like 4"? And what was your result? I just changed over to 3.3" this week cutting everyday at 2.0 speed, but I am also considering doing every other day at 1.0 rotating front/backyard. I have .75 acre so if i don't do 2.0 speed I can't really do it all in one day.

If anyone could share their settings with this type of grass I'd appreciate it!

This has been happening more and more where it just says Video loading failed. Anyone else having this issue?

Setup was very easy, I have not received my L shaped mounting bracket that I intended to use to mount the RTK to the roof immediately, but to my surprise it works very well in the yard.

Day 1 - Mapped the backyard only (around .40 acres) as a test/starting point. Started the mow late after setup around 6pm. I didn't realize that it would have to charge multiple times to finish (my fault did checkerboard on a big yard). It mowed through the night with just the two red lights flashing (cool and creepy at the same time).

Day 2 - Woke up, opened the app to see robot offline (oh no!). The grass was covered in frost and I found the Luba on my steep hill sideways and full of ice. Not a gr

With a few tweaks, these sliders and roster are a TON more fun than NHL23 imo. Of course these sliders could be applied to NHL 23 as well if you have already purchased it. For me I play BAP which is literally copy paste this year, so I'm sticking with NHL 22 unless there is a huge patch for 23 and/or a huge discount. Here are the sliders:

​

https://forums.operationsports.com/forums/ea-sports-nhl/1002241-groundbreaking-fix-nhl22s-ai-dmen.html

So in the photo Zone 8 is the far right, green wire that comes in from the left box and then connects over to right box green to green.

I went to the controller and tested the port which got the correct voltage. I then unplugged the wire and checked it with OHM and it showed zero. I tried it with Zone 7 just to verify and that one showed the correct reading.

I went back to the box shown in the picture and swapped the yellow wire (Zone 7) to the far right solenoid and it fired off no issue. So the Zone 8 solenoid seems fine, it seems to be an issue with the green wire.

This was working up until either today or yesterday. We were doing yard work in the area of the wires BUT does it make

I dug around it and finally got it out, but the line was bone dry and it seems to be plugged up with dirt and whatever else got on there. I used a paperclip and was able to move it around and get the paperclip all the way in but I'm not sure how far the clog is. What are the best options for trying to figure this out? I'd rather not dig up the whole pipe if I don't have to.

​

UPDATE: I got ahold of the previous owner and he said he cut it off from the rest of the system lol. That explains it. Thanks for all help.

1. Conversations - Stupid goals, broken conversations, can't skip even if you want to, it REALLY slows down actually playing games or simming a few here and there.
2. AI - This could have been #1 if I could just play or sim quickly without those conversations. Instead it'll be 2, 3 and 4 lol.
3. AI - Defense refuses to have a brain when retrieving pucks in their own end. Won't go behind the net, won't make the obvious breakout pass, etc
4. AI - ALWAYS forces passes to the BAP player, this has been an issue for years. It would be WAY more fun if they just let the play happen. And then when you are wide open by the net they shoot or pass to another player, it's insanity.
5. Have to

I had one U6 and one AC-Lite which worked perfectly fine with all devices, I just wanted to make it the same and have Wifi6 throughout the house, so I got another U6. As soon as I swapped it out, the one Roku TV we have started having issues with slow internet and Plex in particular going "Offline".

Has anyone else seen this type of behavior? Are there any settings I can adjust to make it work better? I messed around with channels a bit on both WAPs but nothing seemed to help. I switched back to the U6 and AC-Lite and it started working perfectly again.