VortexJD

u/VortexJD


r/Gloomhaven•

Anyone have experience using their own SSL cert for a local GHS server? I'm trying to use Let's Encrypt with an ACME client, but all I get is a non-password protected PFX and I can't seem to figure out how to make this work with GHS-server. Any help would be appreciated!

24


r/satisfactory•

I've setup a few Aluminum lines already using a priority input system. I wanted to setup my next aluminum line using dedicated refineries for the water by-product. Seemed to be working fine but I returned later to find it backed up and stopped. No output items are backed up, only the water and alumina solution. The alumina is all connected 1:1 so it has to be the water, right?

Design layout

Note the fresh water refineries are running at 80% and the waste water refineries are at 90%. This generates 720 water/s of waste which is consumed by the 4 90% refineries (200 * 4 * .9 = 720)

Am I missing something obvious? Not sure if there is a simple t

47

Anyone able to explain this? My food is stored in a pit of 4 fridges. The left 3 fridges all have the same priority and acceptable items. When dupes come to deliver freshly cooked food, they pickup the food, pickup like food from the fridges and then redistribute all the picked up food. I really don't understand this mechanic. No mods are enabled. All fridges have the SAME PRIORITY.

In this short clip Nikola comes and does this two separate times.
https://www.youtube.com/watch?v=ZEK1YvKU4TE

64

r/Nomifactory•

I love Nomi but sometimes I just can't decide on a recipe or path to create a product. This one has me stumped and looking for input.

Draconium. Crafting from Dragon scales is a lot simpler, but it takes 2 pristines and 4 B of nitro diesel for 1 Draconium Ingot. The Manyullin recipe only requires 1 pristine and 2 B nitro diesel for 1 Draconium Ingot. Manyullin does require some other materials and some crafting infrastructure, but those seem insignificant. Maybe the math would show it's quite an investment, but im lazy and dont want to do the whole mathing here.

Which path do you prefer? Is there some other benefit of one path vs another that I'm missing here? Am I just over

63

r/feedthebeast•

Just started playing Techopolis (B12.0) this week using the skyblock map. I'll be honest, it's my first real playthrough of anything beyond 12.2. This is a single-player game, so no server stuff going on here.

Started early trying to spawn hostiles in a dark room. Confirmed light levels were 0 via F3. 6x6 dark room about 30 blocks away from spawn/where I was working. Biome in the area is Jungle/Jungle hills. Days and days went by and the only hostiles I've seen are phantoms in the sky.

Eventually, I gave up trying to spawn hostiles and instead switched to passives as I needed some of their drops. I've setup a strip of grass starting 24 blocks from spawn, 7 blocks wide, stret

20

r/feedthebeast•

I crafted an LV electric wrench with a full battery, but I'm nearly out of charge. How do I recharge it? I've tried with no success:
Flux Capacitor in inventory
LV CEF
MV CEF
LV Battery Buffer
MV Battery Buffer
LV machine battery slot
MV machine battery slot

Is there a block I'm not seeing or a process I can't figure out? I've searched online and apparently nobody else is this blind.

11

r/FCE•

I posted nearly a year ago when I was working on the end game in Frozen Factory. I really struggled to kill a cryo spawner and became so frustrated that I put the game down.

After nearly a year of not playing, and watching AxionEvolved's recent videos of him taking out the cryo spawner, I thought I'd give it another crack. I brought a lot more firepower this time and was much more successful. I'm a little disappointed that in the end, it was much easier to brute force than it was to set up a sophisticated attack. By this I mean dazzlers and melters weren't as effective as I thought they would be, at least for the amount of setup they required. Bombers are powerful, but are infuriat

76

r/FCE•

First time playing through Frozen Factory and I have to say I'm utterly frustrated with the Cryoplasm. Looking for any feedback anyone has on my problem specifically, as I'm nearly at the point of quitting. I want to complete this game as I feel I've come so far and for the most part I'm enjoying it.

Playing on Plentiful resources, rapid power
I have a 250x250 base in the caverns with reinforced walls (knowing at some point, the cryo would break through).
I've built MK1 trenchers on large Moly/Chrome veins.
I have improved lifts feeding up to 2 blast furnaces each making bars/blocks.
I've built 2 particle filters so far, so slowly waiting for the freezon for my trencher mk2 re

76

I have a typical setup where my AETN has horizontal doors under it to control the temp of the room. Temp gets low, triggers thermal sensor, doors open, AETN shuts off due to missing tile underneath. However, I noticed when my screen us up in my base (AETN is lower right corner of map), the AETN sometimes gets stuck on and continues cooling the room way beyond my thermo sensors. I assume this is a bug similar to some other off-screen weirdness I've seen posted here (heat transfer on rails when off-screen in the lower right, what a crazy bug).

Question: Anyone have any simple solutions for this? I can't figure out a way to make it work properly and I end up pumping -50 oxygen into my

211

I built a steel mechanized airlock adjacent to some iron metal tiles. The metal tiles are over 800 C and when built, the airlock quickly heats up to about 250 C and then nearly stops transferring heat. Can't for the life of me figure this one out. I've seen this once before but the problem went away after rebuilding. This time, no combination of rebuilding/reloading seems to help. I have 268 hours in this game and built several petro boilers before, but never encountered a door this annoying. The doors above submerged in lava heating up as expected. Any ideas to get this thing working like a good transfer boi?

video of me building this door and showing how the temp quickly climbs to

811

r/Gloomhaven•

Came across this recently where a boss spawned summoned monsters and we had a chance to act before the summoned monster's turn.

Boss's turn - He summons 2 monsters of same type, now 4 total of that type.
Player's turn - She stuns all monsters on the board.
Monster's turn - 2 original monsters do nothing due to stun. Debuff falls off. Do the summoned monsters remain stunned until their NEXT turn since they take no action their first turn, or is the stun lost on this turn?

From the way RAW reads, I think the stun remains until the FOLLOWING turn, but I wanted to see if other people agree. I don't remember seeing this in the FAQ and can't find this spelled out anywhere online.

87

r/Gloomhaven•

I've been playing a 2p campaign with my wife for the last month or so. We absolutely love the game so far and play it whenever possible. Our starting chars were Scoundrel (Wife) and Brute (Me). We really enjoyed our starting classes a lot, but we were about 15 scenarios in before I realized I may have picked one of the worst PQs for my first character.

522 The Thin Places - >!Complete 6 side scenarios!<

We attempted to play Gloomhaven, as it should be, with as few spoilers as possible, but this resulted in my Brute reaching level 9 and 14/15 perks and completing a large portion of the game (25 scenarios in now) before getting half of my objectives completed. I went ahead

2037

r/cedarpoint•

Was at CP June 9-14. SV was on delayed open every day we were there, opening around noon each day. Does SV normally open at noon, or was this just bad timing with our trip? Looking to come again in the fall and just trying to understand why SV is listed for ERT when it wasn't open early for a full week.

Wouldn't have been so painful if Gatekeeper didn't valley (ruining it's ERT for 2 days) and MF not opening before 920 am either. Left ERT quite a bust while we were there.

35