Mechanized Airlock not transferring heat properly

I built a steel mechanized airlock adjacent to some iron metal tiles. The metal tiles are over 800 C and when built, the airlock quickly heats up to about 250 C and then nearly stops transferring heat. Can't for the life of me figure this one out. I've seen this once before but the problem went away after rebuilding. This time, no combination of rebuilding/reloading seems to help. I have 268 hours in this game and built several petro boilers before, but never encountered a door this annoying. The doors above submerged in lava heating up as expected. Any ideas to get this thing working like a good transfer boi?

video of me building this door and showing how the temp quickly climbs to 250C and then nearly stops heating up. https://youtu.be/7whfYP3kkFI

edit: Resolved (at least got transfer working, still don't understand the bug). Simply rebuilding one of the adjacent heat source tiles causes heat transfer to work normally again. Thanks guys!

edit 2: ugh, so the problem returns. After fixing as I did above, if I rebuild the airlock the problem returns. Horizontal airlocks exhibited the same mechanic. More testing...

edit 3: Added a 3rd surface between the heat source and the door and now you can see the clamping in action! Notice how the door quickly climbs to about 200C, slowly climbs to 250C, very slowly climbs to almost 300C, and then suddenly accelerates to match the source temp around 900C!

https://youtu.be/aGkfk-HjP4Q

edit final (I hope!): So doesn't seem like the clamping happens between 2 identical airlocks. So my final solution will be to use 2 airlocks side by side. Right one to hold the sync with the heat source and left one to allow me to engage/disengage to control my temps. Seems like the easiest and most flexible solution.

https://youtu.be/mDSwmQrtYiA

Posted Jan 16, 2020, 5:28 AM UTC · edited

811
UristMcHammer•

Just a shot in the dark for me since I'm ignorant of the bug or heat transfers in general, but have you tried using the whole door to transfer heat, or having it horizontal?

2
VortexJDOP•

Not a bad suggestion. I have plenty of room to change from a single vertical airlock to double stacked horizontal airlocks. I'll give that a whirl. Been working on this boiler for a few hours and really annoyed that as I fire it up I realize the airlock won't heatup!

I still REALLY want to know what dark magic is happening here and how do I avoid it in the future.

2
stacker55•

post showing a similar if not the same bug you're experiencing

his fix involved sandbox and he didnt offer any workarounds.

2
VortexJDOP•

I've been reading every post here for months. How did I miss this? Thanks for confirming it's not just me. Gives me a few more ideas to play with. I tried deleting the door but gosh darnit never thought about deleting the metal tile that's fully heated!

OMG that fixed it. Just had to delete/rebuild the lower right metal tile and suddenly the airlock matched temp with the adjacent metal tiles. Thanks so much. Still wish I knew what the heck was going on. I can only assume this is one quirky bug.

edit: OK that didn't really fix the bug. It simply bridged the difference in temp between materials, heating it up past some magic point where tile to tile transfer can once again work as expected.

5
Gamers_Handbook•

I door transfer a lot like this in sandbox. When the bug hits, I just delete the door and metal tiles and rebuild. That seems to fix them.

I get hit with the bug where air won't flow through the doors more often though, this one is kinda rare for me.

1
VortexJDOP•

Yeah in sandbox, not a big deal. Super easy to rebuild. But doing this in a normal game where I'm avoiding sandbox, it's a real pain to get dupes in there and rebuild without hot gasses and fluids escaping. I think my 2 door solution elegantly works around the problem. I nearly fell asleep trying to solve this last night, but I'd like to test some more with it to see what effect direction of transfer has on it. This might be why I so rarely run into it. I generally transfer heat to the right and this time I'm going left.

1
Gamers_Handbook•

I almost always transfer up, so maybe that's why it doesn't get me much, it may only get me the few rimes I go sideways. I don't think it's length or width related, as I use both.

1
foreheadteeth•

Heeey you've tripped on the bug I found :)

1
WeSaidMeh•

I've had the same problem, and unfortunately no solution. My steel doors work for a while a transfer heat properly, and then after a few cycles when opened and closed a few times, they stop transferring heat completely or transfer extremely slow.

My workaround was to use other materials, e.g. aluminum/iron/gold ore. Even with the TC being worse than that of steel, it's still better after all because it doesn't randomly bug out. But depending on where you use then, keep an eye on melting temps, ores are lower than steel.

2
[deleted]•

[removed]

1