dpidcoe

u/dpidcoe


r/AgiliteGear•

After owning and very very lightly using my vest for barely 3 years, this plastic strap adjustment piece just spontaneously broke on me: https://imgur.com/a/23OTbOZ

I reached out to Agilite support because this seems like it should pretty clearly be covered under warranty, but they just gave me a flat "no". Has anybody else had this problem and/or any advice on how to fix it? The main reason I picked this vest (comfort) is basically nullified if I can't tension the lower strap properly.

13

r/CAguns•

I know I'm super late to this, but I have a CZ 75b and was looking to get something that actually has holster options like the SP01.

Anybody have any recommendations for similar handguns (9mm, full sized, and heavy enough to not have snappy recoil) that don't involve paying a cop 2x MSRP for something off roster?

121

r/HOA•

My boyfriend lives in a condo in Southern california. His central AC broke and he submitted an application to replace it with a mini-split system back around the end of July. He heard nothing back from the HOA for 45 days (emailing the community manager a few times during that period just resulted in "the board hasn't decided yet"-type responses). On day 46 he emailed again asking if he could go ahead and proceed with the installation, at which point the response was essentially "because your application is for a mini-split instead of a ducted system, your application is denied for now until we have our attorney look at it".

Does anybody have any thoughts on where it goes from here? Technic

121

r/CAguns•

This is kind of an odd question, but as I was thinking about it I realized that my understanding of the current laws isn't really good enough to be sure of all the edge cases that this runs into. My questions boil down to:

  1. If an out of state FFL07 manufactures a 3d printed gun, could I buy it and DROS it through an FFL here in CA the normal way?

  2. Does anything change if it's just the serialized part rather than a complete firearm?

  3. What if it's just the serialized part of a single shot pistol? (no, I'm not asking about making an AR pistol to convert to semi later. Legitimately a single shot pistol)

For some additional context: I've been loosely following the 3d printed gun communi

19

r/GoogleMaps•

I've got a very odd problem that's been bugging me forever and I'm hoping you guys might have some ideas about what's actually going on here: I semi-regularly drive between San Diego and Anaheim, and every so often (maybe 1 in 20 drives) when I put in the navigation I'll see some ridiculous ETA on the order of 5 hours for what should be a ~90 mile trip. Upon further inspection, I'll see that maps decided that I have to drive all the way out to the salton sea first before continuing on my way to Anaheim or SD (I've seen it happen in both directions). More sane routes exist obviously, and clicking them will cause maps to congratulate itself on saving me 3 hours of travel time.

Anybody have an

12


r/Ender3S1•

Hey guys, I just got an ender-3 S1 pro last week and I'm not super happy with the quality of prints right out of the box. As some background, here's what I've done so far:

  • Checked the frame for square, checked belt tension, checked rollers (one or two of the individual rollers are tighter than I'd like, but the corresponding eccentric bearing is already at max adjustment)

  • Before powering up the printer, moved the adjustment dials to ~midpoint of their travel and manually leveled the bed using some paper

  • Powered up the printer, preheated to PLA temperatures, ran through the "aux bed leveling" part of the menu and manually fine tuned it again using paper

  • Ran the auto bed level func

23

r/hvacadvice•

About 6 months ago I had a mitsubishi minisplit/heat pump system installed. It's a 24k btu compressor/inverter with 3 air handlers inside. Since it was installed it's been nothing but trouble.

Within a few weeks it wasn't cooling nearly as well, and when I finally got a tech out he found a leak in the refrigerant line right at the compressor. A couple weeks later, I noticed another reduction in cooling capacity, got a tech out, and he found another leak in a different line where it terminated at the compressor. A month or two after that I noticed more reduction in cooling capacity plus an oily substance dripping out the bottom of the line cover on the biggest indoor air handler. Got a tech

217

r/onewheel•

So as some background, I live in san diego and was thinking of buying a pint X for my commute to work. It's about 6 miles one way, several long hills with a pretty steady climb, and a steep grade (I calculated ~10% from USGS data) down to my office building. I'm kind of on the fence between this and an electric bike, but space in my condo is at a premium and a pint x seems to be about the same price range as an e-bike while being a lot easier to tuck in a corner somewhere.

On to the questions:

  1. How is the learning curve? I had a chance to play around with a pint last year, and after about an hour I got to the point I was doing slow and wobbly circles around a basketball court without exc
610

r/HOA•

Hey guys, I've been having some issues with my HOA board and I need ideas.

As some backstory, this is a condo complex in california. Our architectural modification application looks like it was written back in the 80s when the condos were first built, and the directions are pretty vague. Essentially "write a brief description of your proposed project on these 5 lines. Be sure to include a list of building materials, paint colors, etc" and an optional section for your immediate neighbors to sign off on. This would be all well and good, except that the board has decided to tack on a bunch of extra requirements that aren't spelled out, e.g. "include exact make and model of window/door/AC unit"

112

r/SanDiegoGuns•

With the elections coming up and a new sheriff being on the ballot, I'm curious what information we have about the various candidates. What I've found so far:

  • Kelly Martinez is endorsed by sdcgo. Apparently they've worked with her in her current position to help improve the ccw process, but her website is very vague about her stance on "common sense gun safety issues" and doesn't say anything about ccw.

  • Dave Myers explicitly states that he'll approve "self defense" as a valid reason for getting a ccw permit, but his twitter is full of stuff about how deputies aren't safe because of "ghost guns" and how Martinez is "pandering to the gun lobby" by not doing anything about it (???)

  • Jo

721

r/CAguns•

I've gone through a few different approaches and really haven't been happy with any of them:

522


r/ValveIndex•

I've got kind of a weird issue happening that I don't have the knowledge to troubleshoot on my own any further. Whenever I perform certain actions in games, my screen goes grey as if I've lost tracking, and stays that way for a few seconds. At first I thought it was game specific because it was limited to half life alyx, but now it's happening in population one as well. So far I've noticed it in:

  • Half life alyx: trying to remove or add anything from the wrist storage

  • population one: firing the smg in the tutorial for longer than a second

  • population one: charging the defibrillator paddles

In half life alyx, the issue would eventually go away if I sat there long enough juggling thing

17