xPandaStyle

I upgraded from GP5 and I absolutely loved GP5, so I thought 7 would be a big improvement-

I get about a 400-600ms lag time from when the "metronome" bar passes the note, it should be the playback of the note right as the line passes through the note but getting some audio lag. (Win 8.1 enterprise x64)

Also, in GP5, you could change the tuning, but not the fingering of the notes pretty fast by clicking on the track and adjusting the tuning (IIRC it was lacking the change tuning for all tracks that GP6 had), so I was wondering if GP7 had a change tuning (but keep fingering) for all tracks, similar to GP6.

I suppose I just got spoiled by GP5 but I am pretty sure I'll like the program much m

After defeating a cartel head of an area, it shows "Video now available" something along those lines, where would that video show up? Checked kingslayer files, but I think those are just for intel you pick up along the way

I have two 6 position buffer tubes already and I was wondering if you guys had any updated thoughts on using solely the buffer tube without the stock as OK. Did some searching and came across over a year old replies, which included wrapping it with leather/paracord so it is not easily able to take a stock.

You guys still think it's "ok" to do so or be safe and get a pistol buffer? Thanks!

Edit: Thanks for your help, I ordered a Pistol Tube Buffer kit

So I swirl painted two of my RX200 mods- they turned out great and I put on like 30 coats of clear coat- Krylon high gloss indoor clear coat. They seem to work pretty well, but I am looking for a higher "heavy use" clear coat, something high gloss. Any suggestions?

Here is the completed pictures

RX200Black

RX200Whie

I used enamel paint, Testors brand, and the clear coat, Krylon high gloss acryllic

EDIT: I never used primer, just Enamel paint -> clear coat.

I have had this 4 bay charger since 2014 and I noticed it would always read out 4.1V. It stops putting out a charge at 4.1 and the arrows would stop moving indicating full charge.

This happens with only my 25r batteries, I have 12 batteries in rotation and my 9 MXJO batteries don't have this issue with the charger.

Not a huge deal since my multimeter shows ~4.18V on the batteries, so they are fully charged. Anyone's LUC chargers do this?

So I am about to purchase a RX200, and I dislike the color scheme design. I used to make dual unregulated boxes back in the day, and followed youtube tutorials on enamel painting but have not too much knowledge of the RX200 itself.

So if I take some 800 grit sandpaper to the mod, get rid of all the paint, tape up the contacts, 510, take out the board, I could in theory, paint the mod.

My question is basically, can you disconnect the board from the mod easily? I have seen people access the board, but I am wondering if it is possible to take the board out.

So I left some 18650's (three of them) in a 260w box mod for couple months and they are dead. Charging them doesn't do anything. I've done some googling and learned a bit about "waking" up dormant cells, since they have protection inside the batteries. There are some videos on how to wake them, but involve non-household items to do so.

I have no problem ditching them since I read that once they do go to sleep, it is dangerous to keep using them. BTW, they are Samsung 25r batteries

So a family member is going through a tough time and picked up cigarettes again. I went out and bought her a evod 1000mah battery and a ego style tank. I forgot they don't come with chargers and I gave away all my 510 chargers years ago. Does 7-11 carry them? I don't mind buying a Njoy kit if it comes with one. TIA

I got my cousin an iPV mini 2 and it worked great for couple months, he told me it started autofiring and after inspecting it and opening it, there is juice everywhere. I am also a bit confused on what causes autofiring (assuming the chip is not defective), since juice is a non-conductive material. There is juice all over the chip, around the battery tube sled and a tad bit around the screen. What would be the best way to clean? Will probably try to clean with some Isopropyl alcohol unless there is a better solution.

I used to drip a ton back in the day and bought a box of alcohol wipes, I noticed it doesn't exactly clean up the juice, but rather pushes it around and leaves a grimy feeling

Got a 200w snow wolf, been using it with 28g nickel, 12 wraps on a 3 mm. hits amazing. Once you leave it alone so that the screen turns off, after 15 min or so, if you press the fire button, it turns on again, then you unlock it. Here's the thing.

When you turn it back on after extended sleep, the device only fires to 3 watts. Then to 0 watts, then it kind of pulses to anywhere below 10 watts. Once you power cycle it, it fixes it. I think convicted vapes review had the same issue IIRC. Firing it for more than 5-10 seconds doesn't seem to fix it, or changing the temp or wattage. Anyone else get this?

I'm pretty happy, I was always jealous of players who had friends that played as a team. Only solo q for me since IRL friends hate csgo

So couple of my friends agreed to buy CS GO, and I was wondering if the 24hr cooldown for new accounts is still in place?

I think I got a semi-faulty RH RDA. It looks awesome, but the flavor is nowhere near my Nebula. My main complaint is the screws. I actually prefer grub nut screws, as they can retain in the threads super tight and don't back out. Ever. However, this does no good when the screw size is way too small. I have a precision screw set and I cannot get a good hold on the screws. I ended up using pliers to tighten the screws down. I might take a dremel and cut out a flat head type on the top. Anyways- it looks nice but for the builds I run for ADV, the drip tip is too small so your mouth touches the base and it still gets too hot. For 50$, I can't complain. TLDR; Super nice looking, but would like to

I think I got a semi-faulty RH RDA. It looks awesome, but the flavor is nowhere near my Nebula. My main complaint is the screws. I actually prefer grub nut screws, as they can retain in the threads super tight and don't back out. Ever. However, this does no good when the screw size is way too small. I have a precision screw set and I cannot get a good hold on the screws. I ended up using pliers to tighten the screws down. I might take a dremel and cut out a flat head type on the top. Anyways- it looks nice but for the builds I run for ADV, the drip tip is too small so your mouth touches the base and it still gets too hot. For 50$, I can't complain.

TLDR; Super nice looking, but would like t